Portable End Mill Sharpeners

  • GP-6 Portable End Mill Sharpener for 3mm - 12mm end mill sharpening
  • GP-26 Portable End Mill Sharpener for 10mm - 26mm end mill sharpening
  • Grinding 2, 3 & 4 flute end mills within 0.02mm in less than 1 min.

“Re-sharpen your worn end mills in less than 1 minute!”

If you need to sharpen your blunt end mills, the GP Tools’ range of end mill sharpeners is a must for you. The GP-6 and GP-26 Portable End Mill Sharpeners have been designed for two, three and four flute end mill sharpening, so if you use end mills for angular drilling, plunge-feed milling or similar operations where the tip wears out first, these end mill sharpener/tool grinders from GP Tools are an absolute must to increase the useable life of your end mills multi-fold. And it takes less than one minute to have your end mills as sharp as new!

GP-6 & GP-26 Common Features:

  • Easy to operate with the ability to re-sharpen an end mill within one minute
  • Very precise end mill grinding results and accuracy to within 0.02mm
  • Specially designed alloy steel collets for precision clamping and optimum alignment
  • Highly efficient and reliable DC motor
  • Diamond dust grinding wheels suitable for HSS, HSSE, Cobalt and Carbide end mills
  • Built-in 2-door tool box for storing collets and accessories

Portable HSS & Carbide End Mill Sharpeners

GP Tools: GP-6

See Catalogue

The GP-6 End Mill Sharpener has been designed for sharpening two, three and four flute end mills ranging from 3mm to 12mm.

Product Specification

Ø End Mill Range (mm) Ø3.0 ~ Ø12
No. of Flutes Sharpened 2, 3 and 4 flutes of square shape
Power Supply 220 ~ 240V-AC, 50/60Hz
Motor Speed (R.P.M.) 5,300
Standard Wheel Supplied SD 200 grit × 3 pcs for solid carbide
Collet Series ER-20 with 6 pcs collets
Gross Weight 15.7kg
Dimensions (mm) 300 × 165 × 245

 

Portable HSS & Carbide End Mill Sharpeners

GP Tools: GP-26

See Catalogue

The GP-26 End Mill Sharpener has been designed for sharpening two, three and four flute end mills ranging from 10.1mm to 26mm.

Product Specification

Ø End Mill Range (mm) Ø10.1 ~ Ø26
No. of Flutes Sharpened 2, 3 and 4 flutes of square shape
Power Supply 220 ~ 240V-AC, 50/60Hz
Motor Speed (R.P.M.) 4,600
Standard Wheel Supplied SD 200 grit × 4 pcs for solid carbide
Collet Series ER-32 with 16 pcs collets
Gross Weight 28.0kg
Dimensions (mm) 510 × 290 × 270